When people hear the word “costly borewell drilling project”, they often assume it means a high per-feet drilling rate.
However, the reality is very different.
A borewell becomes truly costly when it involves inferior quality drilling, poor materials, lack of transparency, and zero after-sales support.
The actual per-feet price is not the problem—bad workmanship is.
At Vishal Borewell Drilling Service, we educate customers so they can avoid these expensive mistakes.
Why a Borewell Becomes Costly Even at a Low Drilling Rate
Most customers choose contractors only based on price. But a low quote often hides many compromises that later turn into heavy expenses.
1. Use of Inferior Quality Casing Pipes
Many contractors install cheap, thin, or non-branded casing pipes to cut costs.
Problems Caused by Inferior Casing Pipes
Pipe collapse inside the borewell
Silt and mud entry
Rapid water reduction
Pump failure and motor burning
Costly reconstruction or re-drilling
Hidden Cost for Customers
Replacing or repairing damaged casing can cost 5–10 times more than the initial savings.
2. Improper Drilling Practices That Reduce Borewell Life
A borewell becomes costly when contractors:
Drill at excessive speed
Ignore geological layers
Do not stabilize loose formations
Do not clean the borewell properly
Skip development and flushing
These shortcuts reduce the borewell efficiency drastically.
3. Insufficient Depth or Wrong Borewell Diameter
Some drilling teams intentionally stop early or use smaller diameter tools.
Result?
Water supply becomes inconsistent
Borewell dries quickly
Pump cannot be installed properly
Customer ends up re-drilling
This is the biggest hidden cost in the borewell industry.
4. Use of Unskilled Labour and Outdated Equipment
Many low-rate drilling contractors use:
Untrained helpers
Old drilling rigs
Worn-out hammer bits
Incorrect tools
Consequences
Borewell deviation
Casing not aligned
Pipe leakage
Higher energy consumption
Pump gets stuck or damaged
These issues make the borewell expensive to maintain.
5. No Scientific Groundwater Study
Skipping groundwater survey leads to:
Wrong borewell location
Low water yield
Frequent pumping issues
Complete failure of borewell
A failed borewell is the most expensive outcome of all.
6. No After-Sales Service – The Biggest Reason a Borewell Becomes Costly
Many contractors disappear as soon as drilling is completed.
H4: Common Customer Complaints
“Nobody picked up the call after drilling.”
“There is a problem in the borewell but the contractor is not responding.”
“They promised service but never showed up.”
“Material warranty was fake.”
Lack of after-sales support forces customers to spend continuously on:
Motor lifting
Repairs
Flushing
Extra casing
New pump installation
Thus, the project becomes costly, not because of per-feet rate but because of poor responsibility.
What Makes Vishal Borewell Drilling Service Different?
We believe a borewell should be a one-time investment with long-term benefit.
That’s why we follow transparent, scientific, and quality-driven processes.
Our Commitment to Quality
We use ISI-marked CM PVC casing pipes
We follow proper geological drilling techniques
We perform accurate depth selection
We use modern machinery and trained operators
We provide complete flushing and development
Clear Communication & Full Transparency
No hidden charges
No last-minute surprises
No compromise with material quality
Photographs taken at every stage
Honest estimation and reporting
Reliable After-Sales Support
We don’t leave the customer after the project is completed.
You Receive
Dedicated support team
Quick response to issues
Assistance in pump installation
Guidance for water management
Future maintenance reminders
We believe in long-term trust, not one-time business.
How to Avoid a Costly Borewell Drilling Mistake
Key Points to Check Before Hiring a Contractor
Ask for brand and quality of casing pipes
Check machinery condition
Demand photos/videos during drilling
Verify company reputation
Confirm after-sales service commitment
Ensure proper survey and site study
Choosing the wrong contractor may save ₹20–30 per feet today but can cost ₹50,000–₹1,00,000 later.
Conclusion – Costly Borewell Does Not Mean Higher Rate, It Means Poor Service
A borewell becomes costly only when:
Quality is compromised
Workmanship is poor
No support is provided
Wrong materials are used
Problems are ignored
At Vishal Borewell Drilling Service, we ensure that your project is valuable, not costly.
Call to Action
Choose Quality. Choose Trust. Choose Vishal Borewell Drilling Service.
📞 Call Now for Expert Borewell Consultation: +91-8469877021
🌐 Visit Our Website: https://vishalborewell.com
📩 Get a Free Quote Today – We Respond Quickly!